Buffalo WLAR-L11-L Guia de Configuração

BUFFALO TECHNOLOGY AIR STATION INSTALLATION GUIDES Address: 4030 W. Braker Ln. Suite 350 Austin, TX. 78759 Website: www.buffalotech.com Em

99 You will then see a dialog box like the one below. 7. If you are using the WLI-PCI-OP together (desktop), cli

1010 16. Click the Basic Setting tab. 17. In the ESS ID Textbox, type the word “ANY” or if you have more than one Airstat

1111 1.3 INSTALLING CLIENT MANAGER 1. Insert your Air Station Driver CD in your CD-ROM drive. 2. Double-click the my computer icon on

1212 7. Click the Next Button. 8. Click the Next Button. 9. Click the Start Button.

1313 10. The Client Manager Files will be installed on Your System. We recommend you click No when prompted to add Client Manager t

1414 15. Type the word “ANY” or if you have more than one Airstation Accesspoint on your network, input the last six characte

15152. WINDOWS 2000 INSTALLATION Before you start, we recommend you install the latest service pack. 1. Turn off your computer and

1616 2.1 UPDATING PCI-ADAPTER CARD DRIVER 1. Click Start on the taskbar, and select Settings from the Start menu 2. Select Control panel,

1717 9. Select Search for The Best Driver For Your Device (Recommended) option and click Next. 10. Type or click the Browse button and point to the

1818 2.2 INSTALLATION INSTRUCTIONS FOR PCMCIA CARD 1. Insert the PCMCIA card into the Adapter card you just installed. If this is a l

11 TABLE OF CONTENTS SECTION

1919 5. Clear all check boxes and check only the Specify a Location check box. Click Next. 6. Click the Browse but

2020 8. This dialogue box will appear. Answer the question Do you want to continue the installation? by clicking Yes. 9. Click the Finis

2121 2.3 CONFIGURING YOUR NEW LAN CARD You will now see an Icon in your systray at the bottom of your taskbar that looks like two comp

2222 5. If you are using a PCI-adapter (i.e. Desktop), select the WLI-PCI mode and make sure it is set to ON otherwise if you are

2323 10. Configure your TCP/IP protocol for your LAN setup. If you do not know your LAN setup, consult your users manual or system

2424 17. Click on the Melco Essid service and then click OK. 18. Restart your computer for the new settings to take effect. 19. Install the Clien

2525 2.4 INSTALLING CLIENT MANAGER 1. Insert your Air Station Driver CD in your CD-ROM drive. 2. Double-click the my computer icon on yo

2626 7. Click the Next Button. 8. Click the Next Button. 9. Click the Start Button.

2727 10. The Client Manager Files will be installed on Your System. We recommend you click No when prompted to add Client Manager t

2828 15. Type the word “ANY” or if you have more than one Airstation Accesspoint on your network, input the last six charact

22 Overview for Advanced Users 1. Upgrade or install the PCI adapter (for desktops) driver to “Buffalo” from the “\PCIOP” directory on your CD-R

2929 3. WINDOWS NT 4.0 INSTALLATION Before you start, you must make sure you have Windows NT 4.0 with the latest service pack.

30303. Install the PCI Adapter card into one of the empty PCI slots. 4. Replace the computer cover. 5. Reconnect the power cable. 6. Inser

3131 7. Type your CD-ROM drive letter and then PCML11\Winnt. It should look something like this (E:\PCIL11\Winnt). 8. A dialog box will c

323214. Click OK. 15. Click close when you see Melco WLI-PCM-L11 wireless LAN adapter in the configuration box. 16. A TCP/IP configuration

3333 3.3 Installing the ESS-ID Settings Driver 1. Click Start on the taskbar, and select settings from the Start menu. 2. Select Control

3434 3.4 Troubleshooting Windows NT4.0 has a standard diagnostics program that checks to verify if the WLI-PCM-L11 has be

3535 12. Click OK to close the WliL11 properties dialog box. 13. Click OK to close the Windows NT Diagnostics Dialog box. 14. Click the Start on

363623. Install the Client Manager. 3.5 Changing Resource Settings Follow the steps below if you need to change the settings for t

37376. The current settings for the WLI-PCM (IRQ level, I/O port address) are displayed. Change the settings as required and click the OK button. R

3838 3.6 INSTALLING CLIENT MANAGER 1. Insert your Air Station Driver CD in your CD-ROM drive. 2. Double-click the my computer ico

33 1. WINDOWS 9x and ME INSTALLATION 1.1 Installation Instructions for PCI Adapter Cards 1. Turn off your computer a

3939 7. Click the Next Button. 8. Click the Next Button. 9. Click the Start Button.

4040 10. The Client Manager Files will be installed on Your System. We recommend you click No when prompted to add Client Manager t

4141 15. Type the word “ANY” or if you have more than one Airstation Accesspoint , input the last six characters of the MAC

4242 4. CONFIGURING THE AIRSTATION STANDARD MODEL WLA-L11 After installing the Client Manager, you should be connected to the Air

4343 6. Exit any applications you have running and then Click OK. The AirStation Manager Installer will begin.

4444The AirStation Manager Files will be installed on your system. 10. Click OK to complete the installation. 11. Restart your system whe

4545 15. To change the IP Address settings for your Airstation Accesspoint, select the AirStation. In the Admin Menu, select IP Add

4646 5. CONFIGURING THE AIRSTATION ROUTER MODEL WLAR-L11 5.1 CHANGING TCI/IP SETTINGS IN WINDOWS 98 OR ME Your Airstation Access

4747 2. Select Specify an IP address and input the IP address and subnet mask below. IP address: 192.168.0.2 Subnet Mask: 255. 255.

4848 4. Select the DNS Configuration tab and select Disable DNS. 5. Click OK to close the TCP/IP Properties dialog box. 6. Click OK t

44 3. Install the PCI Adapter card into one of the empty PCI slots. 4. Replace the computer cover. 5. Turn on your computer. The Windows 98 Add Ne

4949 5.2 CHANGING TCI/IP SETTINGS IN WINDOWS 2000 Your Airstation Accesspoint is a Bridge with an IP Address of 1.1.1.1 by default. In o

5050 6. Select Internet Protocol (TCP/IP) and then click the Properties button. 7. Select Specify an IP address a

5151 5.3 CHANGING TCI/IP SETTINGS IN WINDOWS NT 4.0 Your Airstation Accesspoint is a Bridge with an IP Address of 1.1.1.1 by default.

52525. Select TCP/IP Protocol and click the Properties button. 6. Verify that the MELCO WLI-PCM-L11 Wireless LAN Adapter is selec

5353 5.4 INSTALLING AIRSTATION MANAGER 1. Insert your Air Station Driver CD in your CD-ROM drive. 2. Double-click the my computer

5454 7. Click the Next Button. 8. Click the Next Button 9. Click the Start button. The Ai

5555 10. Click OK to complete the installation. 11. Restart your system when the installation is complete for the new settings to take effec

5656 15. To change the IP Address settings for your Airstation Accesspoint , select the AirStation. In the Admin Menu, select IP Ad

5757 10. Select Connect to CATV Internet and click the Next Setup Menu Button. 11. Select Automatic IP Assignme

58586. CONFIGURING THE AIRSTATION LOCAL ROUTER MODEL WLAR-L11-L 6.1 CHANGING TCI/IP SETTINGS IN WINDOWS 98 OR ME Your Airstation

55 7. Select Search For the Best Driver For Your Device (Recommended) and click Next.

5959 6. Select Specify an IP address and input the IP address and subnet mask below. IP address: 192.168.0.2 Subnet Mask: 255. 255.

6060 8. Select the DNS Configuration tab and select Disable DNS. 9. Click OK to close the TCP/IP Properties dialog box. 10. Click OK

6161 6.2 CHANGING TCI/IP SETTINGS IN WINDOWS 2000 Your Airstation Accesspoint is a Router with an IP Address of 192.168.0.1 by default.

6262 6. Select Internet Protocol (TCP/IP) and then click the Properties button. 7. Select Specify an IP address a

6363 6.3 CHANGING TCI/IP SETTINGS IN WINDOWS NT 4.0 Your Airstation Accesspoint is a Router with an IP Address of 192.168.0.1 by default. In

6464 6. Verify that the MELCO WLI-PCM-L11 Wireless LAN Adapter is selected. 7. Select Specify an IP address and input the IP addre

6565 6.4 INSTALLING AIRSTATION MANAGER 1. Insert your Air Station Driver CD in your CD-ROM drive. 2. Double-click the my computer ic

6666 7. Click the Next Button. 8. Click the Next Button 9. Click the Start button. The Ai

6767 10. Click OK to complete the installation. 11. Restart your system when the installation is complete for the new settings to take effec

6868 15. To change the IP Address settings for your Airstation Accesspoint , select the AirStation. In the Admin Menu, select IP Ad

6610. If you are prompted to insert your Windows 98 disk, type or click the Browse button and point to the driver path: E:\WIN98. (E: represents yo

69696.5 PPTP SETUP For WLAR-L11-L model If you do not see the [Protocol Number] option, please visit our web site at www.buffa

7070 5. Click Return and verify that the NAT Table address for IP address of LAN appears to be the IP address of the LAN computer. 6. Your Airstat

71716.6 PPPoE SETUP FOR WLAR-L11-L MODEL If you do not see the PPPoE option, please visit our web site at www.buffalotech.com for a free f

7272 11. Input the “User Name” and “password” given by your Internet service provider. Reenter the “password” in the “confirm” textbox an

7373 6.7 Glossary of Terms Used in the PPPoE settings User Name – This is the user specified name that is to be recognized by your

74747. CONFIGURING THE AIRSTATION ANALOG MODEM MODEL WLAR-L11-M Your Airstation Accesspoint has an IP address of 1.1.1.1 by default. In order f

75754. Select Connecting to the Internet via Internal modem and click the Next Setup Menu Button. 5. Input the necessary items and click Set But

7676 8. Apple Installation Your Apple Computer must either have an Airport card or PCMCIA wirelesses card that is 802.11b complia

7777 Address: 1977 W. 190th Street Suite 100 Torrance, CA 90504 Website: www.buffalotech.com Email: Sales - [email protected] Technical Supp

7878

771.2 Installation Instruction for the PCMCIA Wireless Card 1. Insert the PCMCIA card into the PCI adapter slot. The Windows 98 Add New

88 3. Select Search For the Best Driver For Your Device (Recommended) and click Next 4. Clear all the check b