Buffalo WHR-1166D Manual do Utilizador

AirStationWHR-1166DUser Manualwww.buffalotech.com35020394-012014-02

10Bottom1 Setup Card SlotThis is the slot where the AirStation setup card is stored. The initial settings for the username, password, SSID, andencryp

113 Confirm that the mode switch is in the “Auto” position. Plug one end of the LAN cable into your modem and the other end to the AirStation’s Inter

125 If using a wired LAN, connect the AirStation LAN port and computer using a LAN cable.If using a wireless LAN, connect the computer to the wireles

13Opening SettingsTo configure the AirStation, log in to Settings as shown below.1 Launch a web browser.2 Enter the AirStation’s LAN-side IP address

144 This is the home page of Settings, where most AirStation settings can be configured.Connect Your Wireless DevicesFor each wireless device that yo

15Chapter 2 - SettingsSettings is the configuration GUI for the AirStation. You can configure all settings for the AirStation from here.Easy AdminHome

16WirelessConfigure basic wireless settings here.2.4 GHz (11n/g/b)5 GHz (11ac/n/a)You may enable or disable either wireless frequency range independen

17AOSS/WPSThe following window appears when you click the panel. Click OK to start AOSS/WPS.Guest AccountsConfigure guest account settings here.SSID T

18Web FilteringConfigure web filtering. This is available in router mode only.Block Malicious Sites Blocks malware, phishing, and scam sites.Block Mal

19Network DevicesCheck the status of each device connected to the network. This is available in router mode only.Displays the IP address of each devic

2ContentsChapter 1 - Setup ...7Introduction ...

20Advanced SettingsInternetConfigure the WAN-side port (Internet port) here.Internet - Internet (Router Mode Only)Method of Acquiring IP AddressSpecif

21PPPoEConfigure PPPoE settings here.Internet - PPPoE (Router Mode Only)Default PPPoE ConnectionIf you have registered multiple connection destination

22PPPoE ConnectionThis is displayed when Edit Connection List is clicked.Name of ConnectionEnter the name to identify the connected destination. You m

23Dynamic DNSConfigure dynamic DNS settings here. Many settings are only available when the appropriate dynamic DNS service is enabled.Internet - Dyna

24NATConfigure network address translation settings here. This enables LAN-side devices to communicate with the Internet.Internet - NAT (Router Mode O

25DHCP LeaseConfigure DHCP exceptions here.LAN - DHCP Lease (Router Mode Only)Current DHCP ClientsDisplays information for current leases. An IP addre

262.4 GHz/5 GHzConfigure basic wireless settings from here.Wireless - 2.4 GHz or 5 GHzWirelessDetermines whether to allow wireless communication. If t

27Wireless ChannelSets a channel (a range of frequencies) for wireless connections. With Auto Channel selected, the AirStation will automatically use

28Wireless Client IsolationIf enabled, the wireless client isolation blocks communication between wireless devices connected to the AirStation. Wirele

29WPSWPS (Wi-Fi Protected Setup) enables users to easily configure wireless networks and add new devices.Wireless - WPSWPS Enable to use WPS automatic

3LAN ...24DHCP Lease...

30Wireless - AOSSExclusive SSID for WEPYou may allow a separate SSID specifically for WEP connections. If Stop is selected,then clients will not be ab

31Allow WEP for Game Consoles OnlyThis allows game consoles that only support WEP to connect to the network.AOSS Button on the AirStation UnitIf Enabl

32MAC FilteringRestrict access to specific wireless devices here.Wireless - MAC FilteringEnforce MAC Filtering Enable to restrict wireless connections

33Guest AccountsConfigure the AirStation’s guest accounts here.Wireless - Guest AccountsGuest Accounts Enable or disable the guest accounts.Guest User

34WBConfigure WB (wireless bridge) here. This function is only available when the AirStation is in bridge mode.Wireless - WBWB If enabled, the AirStat

35FirewallConfigure the AirStation’s firewall here.Security - Firewall (Router Mode Only)Basic RulesEnable to use any of the quick filters. Preconfigu

36IP FilterCreate and edit IP filters here.Security - IP Filter (Router Mode Only)Action Specify how to process target packets.Direction Specify the t

37Port ForwardingConfigure port translation here.Security - Port Forwarding (Router Mode Only)GroupSpecify a group name for a new rule to belong to. S

38DMZConfigure a destination for packets that don’t have a LAN-side destination.Security - DMZ (Router Mode Only)Add IP Address to DMZEnter the IP add

39Web FilteringSecurity - Web Filtering (Router Mode Only)Norton ConnectSafe must be activated by the customer. Use of Norton ConnectSafe is subject t

4Chapter 3 - Wireless ...49Wireless Options ...

40Access ControlSecurity - Access Control (Router Mode Only)Access Control Check to enable access control. Click Add to configure the schedule.Add Acc

41PrioritySelect high, medium, or low. If packets do not qualify for classification as a type on the list, then their priority is treated as a level b

42SystemConfigure basic AirStation settings here.Admin - SystemAirStation NameEnter a name for the AirStation. Names may include up to 64 alphanumeric

43Permitted PortDisplayed only if Internet-side configuration is enabled. Set a port number (1 - 65535) to configure the AirStation from the WAN (Inte

44Reset / RebootFrom this page you can save and restore the AirStation’s settings, initialize the AirStation, or reboot the AirStation.Admin - Reset /

45Update FirmwareUpdate the AirStation’s firmware here.Admin - Update FirmwareFirmware Version Displays the current firmware version of the AirStation

46System InformationView system information for the AirStation.Status - System InformationModel Displays the product name of the AirStation and the fi

47LogsThe AirStation’s logs are recorded here.Status - LogsDisplay logs Choose the types of logs to display.Logs Displays the log information recorded

48PingA ping test checks whether the AirStation can communicate with a specific network device.Status - PingDestination AddressEnter the IP address or

49Chapter 3 - WirelessWireless OptionsYou may use any of the following methods to connect devices to the AirStation wirelessly.Manual ConfigurationOn

5Technical Specifications ...63GPL Information ...

50Advanced Wireless ConfigurationManual Configuration (SSID and Password)1 Click the wireless icon.2 Select your AirStation’s SSID from the list.Not

513 Without entering a password, press the AOSS button on the AirStation.Notes: • WPS supports Windows 8.1, Windows 8, Windows 7, and Windows Vista

52Chapter 4 - UtilitiesHow to Download UtilitiesYou can download utilities for your AirStation from Buffalo’s website.http://d.buffalo.jp/whr-1166d/

53List of Utilities with Description of EachAirStation Configuration ToolYou can enter AirStation’s Settings and change its IP address with this tool.

54Client ManagerUse this software to let your Windows PC connect to the AirStation with AOSS.Client Manager V supports Windows 8.1, Windows 8, Windows

55AOSS AssistantUse this software to let your Mac connect to the AirStation with AOSS.Compatible with:OS X 10.9, 10.8, 10.7, 10.6, 10.5, 10.4WLAN Moni

56Chapter 5 - TroubleshootingFinding Your AirStation on the NetworkBy default, your AirStation is accessible on your local network at the IP address 1

57Open a browser (such as Firefox) on your computer and type 192.168.11.1 into the URL window. Click Go. The router’s settings page should open.Enter

58Appendix A - Supplemental InformationPackage ContentsThe following items are included in your AirStation package. If any of the items are missing, p

59Feature Parameter Default SettingLANLAN-side IP AddressIP address: 192.168.11.1Subnet mask: 255.255.255.0DHCP Server EnabledDHCP IP Address Pool F

6Connecting Wireless Devices Using AOSS ...75Pushbutton Method ...

60Feature Parameter Default Setting2.4 GHz5 GHzWMM Settings Not displayedWMM-EDCA Parameters (Priority AC_BK (Low))For AP For STACWmin 15 15CWmax 1023

61Feature Parameter Default SettingMulticast ControlSnooping EnabledMulticast Aging Time 300 secondsGuest AccountsGuest Accounts DisabledGuest User Au

62Feature Parameter Default SettingSystemAirStation Name “AP” + AirStation’s MAC AddressAdministrator admin (fixed)Administrator Password passwordAcce

63Technical SpecificationsWireless LAN InterfaceStandard Compliance IEEE 802.11ac / IEEE 802.11n / IEEE 802.11a / IEEE 802.11g / IEEE 802.11bTransmiss

64Wired LAN InterfaceStandard ComplianceLAN Side:IEEE 802.3u (100BASE-TX)/IEEE 802.3 (10BASE-T)Internet Side:IEEE 802.3ab (1000BASE-T)/IEEE 802.3u (10

65Appendix B - TutorialsConfiguring the AirStation for Optimal Performance and SecuritySome basic configuration tips to help improve your router perfo

66Configuring the Web FilterYou can apply a web content filter to prohibit access to sites that contain objectionable content. You can access the web

67Computers Excluded from FilterExcluded computers can access any website without being affected by the content filter. You can register up to 20 excl

68Configuring Access ControlYou can set up a schedule that dictates when a target computer on the network can (or cannot) access the Internet. To conf

697 Click Add.You will be returned to the Access Control screen, and the computer’s access settings will be displayed. You can click Edit to modify t

7Chapter 1 - SetupIntroductionThank you for purchasing a Buffalo AirStation. The WHR-1166D AirStation is a dual-band wireless router with outstanding

70Setting Up Port Forwarding RulesIf UPnP is enabled, most programs will configure this for you automatically. Otherwise, you can manually set rules f

71Managing Port Forwarding RulesIndividual rules cannot be turned off. Only a rule group can be shut off. You can click Edit to make any changes to in

727 If the access point supports WPS or AOSS, you can use either to connect the AirStation. Once the access point is connected and its settings are d

73Saving and Restoring Settings with a Backup FileOnce you have finished configuring your AirStation to your needs, you can save the current configura

74Restoring Settings with a Backup FileRestore settings can be found on the same tab.1 On the Reset / Reboot page, select Restore settings.2 The Bro

75Connecting Wireless Devices Using AOSSYou can use the physical AOSS button on your AirStation to easily connect wireless devices that support AOSS o

76How to Use QoSQoS (quality of service) is a feature that allows the AirStation to prioritize traffic by type. QoS applies to both upstream and downs

77Once an entry has been saved, you can make additional changes to any entry and click Apply to save them. A policy can be turned on or off by checkin

784 Right-click the network adapter, then click Properties.5 If the “User Account Control” screen opens, click Yes or Continue.6 Select “Internet P

79Windows XPTo configure TCP/IP in Windows XP, follow the procedure below.1 Open Control Panel.2 Double-click Network.3 Right-click the network ada

81 AOSS buttonTo initiate AOSS, hold down this button until the wireless LED flashes (about 3 second). Then, push or click the AOSS button on your wi

80Appendix C - Regulatory Compliance InformationOnly use the cables and accessories that are included in the package. Don’t use other accessories or c

81IC statement (IC déclaration)This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:(1

82Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou

9Off:Mode switch is in the “Bridge” position.Back Panel1 Mode SwitchThis switch changes between router mode and bridge (access point) mode. Auto mode