Buffalo WZR-1166DHP Manual do Utilizador descarregar pdf (Página 30)

NAT

Configure network address translation settings here. This enables LAN-side devices to communicate with the Internet.

Internet - NAT (Router Mode Only)

Address Translation Enable to use network address translation.

LAN

Configure LAN-side and DHCP server settings.

LAN - LAN

LAN-side IP Address

By default, the LAN-side IP address is 192.168.11.1 with subnet mask 255.255.255.0. You

may change it here.

DHCP Server Enable or disable the DHCP server, which assigns LAN-side IP addresses automatically.

DHCP IP Address Pool

Configure the range of IP addresses to be assigned by the DHCP server and IP addresses

to be excluded from that range. Values from 1-256 may be entered.

LAN-side IP Address (For

IP Unnumbered)

Set an IP unnumbered LAN-side IP address.

Note: A PC with a normal LAN-side IP address and a PC with an IP unnumbered IP

address cannot communicate each other.

Advanced Settings Check Display to display DHCP server advanced settings options.

Lease Period

Set the effective period for IP addresses assigned by the DHCP server. Up to 999 hours

may be entered.

Default Gateway Set the default gateway IP address for the DHCP server to issue to clients.

DNS Servers Set the DNS server IP address for the DHCP server to issue to clients.

WINS Server Set the WINS server IP address for the DHCP server to issue to clients.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 113 114

Sem comentários

Buffalo WZR-1166DHP Manual do Utilizador Página 30